English 
Professional Manufacturer Of Baked
Whole-set Equipment
1. The user must install a double-pole air circuit breaker with leakage protection on the wall 1 and 2 meters next to the moon cake forming machine to ensure the safety of electricity use. A 10A friend-pole circuit breaker with leakage protection (30mA) is optional.
2. According to the nameplate, connect the power supply and gas source 0, 4-0, 6Mpa, 0, 3m/min and connect the reliable ground wire (to ensure the normal operation of the machine), and the equipotential wiring should be carried out by professional electricians according to the user's equipment. connect.
3. Do not drive gears, chains and sprockets by hand to avoid pinching.
4. Do not clean or add lubricating oil when the moon cake forming machine is running.
5. To replace the power cord, use oil-resistant flexible sheathed cable.
6. The electrical circuit of the moon cake machine has been installed and adjusted before leaving the factory, and must not be disturbed.
7. During the operation of the equipment, it is strictly forbidden to put handles or other items under the molding die.
8. When installing/replacing the forming mold (moon cake mold), the main air valve should be closed first, and the safety switch should be installed.
